新型明桥面轨枕板式无砟轨道结构参数研究

钢桁梁桥由于其承载性能好和跨越能力较强等优点,在大跨度铁路桥梁中被广泛采用。但大跨度钢桁梁桥具有跨中挠度大、梁端转角大和温度变形敏感等特点,为了减小大跨度钢桁梁桥二期恒载、适应桥梁变形特性,在大跨度钢桁梁桥上采用新型明桥面轨枕板式无砟轨道结构。以南沙港铁路某大跨度钢桁梁桥铺设新型明桥面轨枕板式轨道为背景,采用有限元法建立大跨度钢桁梁桥上轨枕板式无砟轨道结构计算模型,研究了轨枕板结构参数对轨道受力与变形的影响,确定轨道结构的合理尺寸与参数。结果表明:轨枕板的外形尺寸直接影响其受力和变形特征;板下垫层的厚度对垫层的受力特性的影响较大;建议南沙港铁路某大跨度钢桁梁桥上采用具有2组承轨台、宽度为2800 mm的轨枕板,轨枕板厚度为280 mm,板下垫层厚度为120 mm。     

不锈钢圆管内湍流摩擦因数研究

针对不锈钢圆管湍流摩擦因数计算存在的问题,在雷诺数为(1~15)×104的范围内,测定了不锈钢圆管的阻力性能,并对其湍流摩擦因数进行计算和分析,在此基础上提出了计算该种不锈钢圆管湍流摩擦因数的经验公式,并与常用的计算光滑圆管湍流摩擦因数的经验公式进行比较。结果表明,提出的经验式计算值与实测值基本一致,平均误差0.606%,最大误差1.256%。     

高桩码头纵梁维修加固方法及对比

20世纪70～80年代修建的高桩码头由于长期处于氯盐侵蚀的环境中,码头浪溅区梁板钢筋容易发生锈蚀膨胀,进而引起混凝土纵向开裂、脱落。为保证码头结构安全需要对此类型的梁进行维修加固,基于实际码头维修加固工程对加大梁截面和粘贴碳纤维布两种维修加固方法进行介绍,从应用范围、施工效率、质量及成本4个方面对两种方法进行对比分析。结果表明,加大截面法比粘贴碳纤维布法的适用范围更广泛,但在施工效率、成本、施工难易及质量可控性等方面,粘贴碳纤维布法具有明显优势。     

电力机车车轴热处理工艺的研究

分析了EA4T钢的性质特征以及传统调质处理工艺所存在的问题,系统地研究了正火、淬火及回火工艺对材料的组织及性能的影响规律。通过系统的实验,探索出了DJ4型机车车轴的最佳热处理工艺参数。     

地铁车辆不锈钢车体的强度分析

结合国内某地铁车辆不锈钢车体,在分析其结构特点和不锈钢材料的力学性能的基础上,建立了车体结构的有限元模型,并借鉴国内外的地铁车辆技术标准和实际运行状态确定了载荷工况,分析了车体结构在各个工况下产生的应力、变形和模态。结果表明该不锈钢车体的强度满足要求。     

港口设备钢丝绳断绳事故分析及预防

对钢丝绳断绳事故进行分析,提出了一些措施,诸如通过钢丝绳的选用、维护、保养、检测等,来延长钢丝绳的使用寿命,杜绝事故的发生。     

Patterns in diversity and community structure of epipelagic copepods from the Brazil–Malvinas Confluence area, south-western Atlantic

Diversity and structure of epipelagic copepod communities were investigated using 70 zooplankton samples collected from the top 50 m of the Brazil–Malvinas Confluence area between 35° and 55°S. Biogeographic patterns were investigated using multivariate analysis. Biodiversity patterns were examined using different univariate indexes. Representatives of 35 species of copepods from 23 genera and 13 families were found. Two zones were delimited based on their copepod composition, one in the subtropical waters of the Brazil current, and the other in the subantarctic waters of the Malvinas current. Both environments displayed contrasting patterns of biodiversity depending upon which element is measured (regional species richness as well as mean point species richness were significantly higher in the subtropical group of stations, whereas taxonomic distinctness was significantly higher in the subantarctic community). Based on these contrasting results, we suggest the use of both kind of indexes when defining priority areas for conservation.     

Fluxes of dissolved inorganic carbon in three estuarine systems of the Cantabrian Sea (north of Spain)

The diffusive and in situ fluxes of dissolved inorganic carbon (DIC) and total alkalinity (TA) have been measured and an estimation has been made of the water–atmosphere fluxes of CO₂ in three estuarine systems of the Cantabrian Sea during the spring of 1998. Each of these systems undergoes a different anthropogenic influence. The diffusive fluxes of dissolved inorganic carbon and total alkalinity obtained present values ranging between 0.54–2.65 and 0.0–2.4 mmol m⁻² day⁻¹, respectively. These ranges are in agreement with those of other coastal systems. The in situ fluxes are high and extremely variable (35–284 mmol TA m⁻² day⁻¹, 43–554 mmol DIC m⁻² day⁻¹ and 22–261 mmol dissolved oxygen (DO) m⁻² day⁻¹), because the systems studied are very heterogeneous. The values of the ratio of the in situ fluxes of TA and DIC show on average that the rate of dissolution of CaCO₃ is 0.37 times that of organic carbon oxidation. Equally, the interval of variation of the relationship between the benthic fluxes of inorganic carbon and oxygen (F_DIC/F_DO) is very wide (0.3–13.9), which demonstrates the different contributions made by the processes of aerobic and anaerobic degradation of the organic matter, as well as by the dissolution–precipitation of CaCO₃. The water–atmosphere fluxes of CO₂ present a clear dependence on the salinity. The brackish water of these systems (salinity<20), where maximum fluxes of 989 mmol m⁻² day⁻¹ have been estimated, act as a source of CO₂ to the atmosphere. The more saline zones of the estuary (salinity>30) act as a sink of CO₂, with fluxes between −5 and −10 mmol m⁻² day⁻¹.     

双相化处理工艺对冷拔双相钢丝组织和性能的影响

研究了08Mn2Si钢不同工艺处理后双相组织的形态及冷拔中组织与性能的变化,结果得到:950℃预淬火后再经临界区加热淬火时可以得到细小均匀的纤维状双相组枳,这种组织在冷拔中转变为很细的平行于拔丝方向的纤维状组织,且具有最好的强度和韧性。